Description
PTFE rod has excellent resistance to most chemicals and solvents and is capable of operating at high and low temperatures - up to 260°C. The PTFE rods also have a very low coefficient of friction and are commonly used in food contact applications. Rods of PTFE provides good thermal stability and has good electrical properties, but are not suitable for wear application and is difficult to bond.
Specification
PROPERTIES | STANDARD | UNIT | |
Density | g/cm3 | 2.10-2.30 | |
Tensile strength | Mpa | 15 | |
ultimate elongation | % | 150 | |
Tensile strength | D638 | PSI | 1500-3500 |
Produce Max.Temp | ºC | 385 | |
hardness | D1700 | D | 50-60 |
Impact strength | D256 | Ft./Lb./In. | 3 |
Melting poing | ºC | 327 | |
working Temp. | ASTM D648 | ºC | -180 ~260 |
Elongation | D638 | % | 250-350 |
Deformation % 73 0F ,1500 psi 24 hours | D621 | N/A | 4-8 |
Deformation % 1000F,1500psi,24hours | D621 | N/A | 10-18 |
Deformation % 2000F,1500psi 24 hours | D621 | N/A | 20-52 |
Water absorption | D570 | % | 0.001 |
Coefficient of Friction | N/A | 0.04 | |
Dielectric constant | D150 | Ω | 1016 |
Dielectric strength | D257 | Volts | 1000 |
Coeffcient of thermal expansion 73 0F | D696 | In./In./Ft. | 5.5*10.3 |
Coefficient of thermal conductivity | *5 | Btu/hr/ftz | 1.7 |
PV at 900 ft./min | N/A | 2500 | |
Colour | *6 | N/A | white |
Advantages
Extremely high chemical resistance
Wide temperature range - maximum service temperature 260°C
Low friction and low adhesion
Resistant to Radiation
Excellent dielectric performance
Industries
Commonly manufactured into gaskets and seals, bushings, slide bearings, insulators, washers, slide plates and chemical linings for use across a broad range of industries.
Description
PTFE rod has excellent resistance to most chemicals and solvents and is capable of operating at high and low temperatures - up to 260°C. The PTFE rods also have a very low coefficient of friction and are commonly used in food contact applications. Rods of PTFE provides good thermal stability and has good electrical properties, but are not suitable for wear application and is difficult to bond.
Specification
PROPERTIES | STANDARD | UNIT | |
Density | g/cm3 | 2.10-2.30 | |
Tensile strength | Mpa | 15 | |
ultimate elongation | % | 150 | |
Tensile strength | D638 | PSI | 1500-3500 |
Produce Max.Temp | ºC | 385 | |
hardness | D1700 | D | 50-60 |
Impact strength | D256 | Ft./Lb./In. | 3 |
Melting poing | ºC | 327 | |
working Temp. | ASTM D648 | ºC | -180 ~260 |
Elongation | D638 | % | 250-350 |
Deformation % 73 0F ,1500 psi 24 hours | D621 | N/A | 4-8 |
Deformation % 1000F,1500psi,24hours | D621 | N/A | 10-18 |
Deformation % 2000F,1500psi 24 hours | D621 | N/A | 20-52 |
Water absorption | D570 | % | 0.001 |
Coefficient of Friction | N/A | 0.04 | |
Dielectric constant | D150 | Ω | 1016 |
Dielectric strength | D257 | Volts | 1000 |
Coeffcient of thermal expansion 73 0F | D696 | In./In./Ft. | 5.5*10.3 |
Coefficient of thermal conductivity | *5 | Btu/hr/ftz | 1.7 |
PV at 900 ft./min | N/A | 2500 | |
Colour | *6 | N/A | white |
Advantages
Extremely high chemical resistance
Wide temperature range - maximum service temperature 260°C
Low friction and low adhesion
Resistant to Radiation
Excellent dielectric performance
Industries
Commonly manufactured into gaskets and seals, bushings, slide bearings, insulators, washers, slide plates and chemical linings for use across a broad range of industries.
粤公网安备44000000000000号
